| PRAMAC W 170 |
 |
Item code: LA170MHI000

(purely indicative picture) |
Main features
| Rated maximum power (LTP) |
: |
4 kW |
| Rated prime power (PRP) |
: |
3,8 kW |
| Voltage |
: |
230, 400 V |
| Frequency |
: |
50 Hz |
| Minimum welding current |
: |
30 A |
| Maximum welding current (35%) |
: |
170 A |
| Max. diameter of rutilic electrodes |
: |
4,00 mm |
| Max. diameter of basic electrodes |
: |
3,25 mm |
| Max. diameter of cellulosic electrodes |
: |
3,25 mm |
| Engine manufacturer |
: |
Honda |
| Starting system |
: |
Recoil |
| Speed governor |
: |
Mechanical |
W Series
Welders from 170 to 220A with mechanic regulation of the welding current. Reliability, sturdiness.
|
| Three-phase power factor |
0,8 cosPhi |
| Single-phase maximum power (LTP) |
4,44 kVA |
| Single-phase maximum power (LTP) |
4 kW |
| Single-phase prime power (PRP) |
4,22 kVA |
| Single-phase prime power (PRP) |
3,8 kW |
| Single-phase continuous power (COP) |
4 kVA |
| Single-phase continuous power (COP) |
3,6 kW |
| Single-phase power factor |
0,9 cosPhi |
| Rated maximum power (LTP) |
5 kVA |
| Rated maximum power (LTP) |
4 kW |
| Rated prime power (PRP) |
4,75 kVA |
| Rated prime power (PRP) |
3,8 kW |
| Rated continuous power (COP) |
4,5 kVA |
| Rated continuous power (COP) |
3,6 kW |
| Three-phase rated current at COP |
6,5 A |
| Rated current at COP |
17,4 A |
| Phases |
3 Y |
| Voltage |
230, 400 V |
| Frequency |
50 Hz |
| Battery charger voltage |
No |
| Battery charger current |
No |
| Panel location |
On alternator |
| Frame type |
Tubular |
| Compliancy certification |
CE |
|
| Welding current (60% duty) |
130 A |
| Open circuit voltage |
95 V |
| Welding regulation type |
Manual |
| Minimum welding current |
30 A |
| Maximum welding current (35%) |
170 A |
| Minimum welding voltage |
21,2 V |
| Maximum welding voltage |
26,8 V |
| Max. diameter of rutilic electrodes |
4,00 mm |
| Max. diameter of basic electrodes |
3,25 mm |
| Max. diameter of cellulosic electrodes |
3,25 mm |
|
| Engine manufacturer |
Honda |
| Model |
GX270 |
| Stroke |
4 |
| Fuel |
Gasoline |
| Number of cylinders and disposition |
1, inclination angle |
| Displacement |
270 cm³ |
| Air intake |
Natural |
| Starting system |
Recoil |
| Nominal operating speed |
3180 rpm |
| Speed governor |
Mechanical |
| Continuous power COP |
4,6 kW |
| Prime power PRP |
5,1 kW |
| Standby power LTP |
5,8 kW |
| Lube oil capacity |
1,1 l |
| Fuel consumption at 75% load |
1,41 l/h |
| Electric circuit voltage |
No |
| Cooling system |
Air-cooled |
|
| Alternator specifications |
| Alternator manufacturer |
PRAMAC SpA |
| Model |
Asynchronous |
| Poles |
2 |
| Voltage regulation system |
Capacitor |
| Protection grade |
IP 23 |
|
| Fuel tank location |
On engine |
| Fuel tank capacity |
6 l |
| Running time at 75% COP |
4,24 h |
| Measured acoustic power (LWA) at 4 mt |
96,5 dBA |
| Noise level at 7 m |
72 dBA |
| Guaranteed noise level (LWA) |
97 dBA |
| Operating conditions |
No |
|
| Length |
810 mm |
| Width |
610 mm |
| Height |
600 mm |
| Dry weight |
108 Kg |
|
| Wheels and handles |
Optional |
| Job site trailer |
No |
| Road trailer |
No |
|
| Hourmeter |
No |
| Voltmeter |
No |
| Isometer |
No |
| Water thermometer |
No |
| Voltage presence indicator |
No |
| Engine oil / water high temperature indicator |
No |
| Alternator high temperature indicator |
No |
| Low fuel level indicator |
No |
| Low oil pressure Indicator |
No |
| Low battery charger indicator |
No |
| High temperature generator shut-down system |
No |
| High temperature engine shut down |
No |
| Low fuel level shut-down system |
No |
| Low engine oil pressure shut-down system |
No |
| Low battery charger shut-down system |
No |
| ELCB (Earth Leakage Circuit Breaker) |
No |
| Magnetothermic protection |
Yes |
| Thermal protection only |
No |
| Hot start device |
No |
| Auto-idle |
No |
| Emergency stop |
No |
| Lube oil guard |
Yes |
| Welding current selection (50 ~ 100%) |
No |
| Polarity switch predisposition |
No |
| Arc control device |
No |
| Remote control socket |
No |
| Double-positive welding socket (with additional resistance) |
Yes |
|
| CEE 2P+T 230V 16A |
1 |
| CEE 3P+T 400V 16A |
1 |
|
Technical specifications are subject to change without notice. Consult your local PRAMAC representative for more information.
|